Description
Floating Fire Pump – Power, Autonomy and Remote Control
The floating fire pump is an essential piece of equipment for fire and rescue services. Designed to provide flexibility, mobility, and stability, it allows crews to draw water directly from natural sources such as rivers, lakes, or ponds when traditional water supply systems are unavailable, insufficient, or difficult to access. It is also highly effective during flood operations or interventions in challenging environments.
Powered by a high-performance 13 HP engine from Briggs & Stratton, this pump delivers outstanding performance with a maximum flow rate of 1500 L/min and a maximum pressure of 5.6 bar. At 500 L/min, it maintains a stable pressure of 3.45 bar, ensuring reliable water supply for firefighting operations.Thanks to its ultra-fast self-priming system, the pump becomes operational in less than 2 seconds, even with a minimum water depth of only 4 cm.
It is also capable of pumping dirty water containing suspended particles, making it ideal for use in natural water sources.For enhanced safety and ease of use, the pump features a remote control system with a range of up to 150 meters, allowing operators to start, stop, or activate the choke, as well as switch between slow and fast operating modes. A manual start option is also available in case the battery runs out.
Powered by a Milwaukee M18 battery (5 or 8 Ah), the system provides approximately 50 starts per battery, with a charging time of around 100 minutes. Operators are also alerted by a low fuel warning indicator, displayed as a flashing red light.With 60 minutes of runtime at full load, a 2.8 L fuel tank, a DN65 discharge outlet, and compact dimensions of 750 × 750 × 550 mm, this floating pump combines performance, reliability, and portability, with a total weight of 50 kg.
Robust, efficient, and smartly designed, this floating fire pump is the ideal solution for ensuring rapid and reliable water supply during emergency operations.
Characteristics
Maximum flow rate: 1500 L/min – 0.1 bar
Maximum pressure: 5.6 bar
Pressure at 500 L/min: 3.45 bar
Reservoir: 2.8 L
Weight: 50 kg
Remote control range: Up to 150m
Pump autonomy time: 60 minutes at full charge
Autonomy of each battery: Approximately 50 starts
Charging time for each battery: 100 minutes
Hose outlet diameter: DN65
Engine brand: Bridge and Straton, 13HP
Pump dimensions: 750x750x550mm
Advantages
Remote control:
– Start, Stop, Starter
– Slow mode, Fast mode
Manual start in case of battery failure
– Low fuel level alert: Indicated by a flashing red light
– Battery: Milwaukee M18 (5 or 8 Ah)
– Self-priming: Less than 2 seconds for self-priming
– Minimum water height: 4 cm
Possible pumping of contaminated water
Capable of pumping water containing suspended particles
Accessories
